How to Clean Your Peak Pro Glass: A Step-by-Step Guide
How to Clean Your Peak Pro Glass: A Step-by-Step Guide
Cleaning your Peak Pro glass regularly is essential for maintaining optimal performance and preserving the flavor of your concentrates. Over time, residue builds up from the vapor, which can affect both the function and taste of your sessions. Fortunately, cleaning the Peak Pro glass is a simple process that can be done with just a few household items. Here’s a step-by-step guide to help you keep your device in top shape.
What You’ll Need:
- Isopropyl alcohol (preferably 91% or higher)
- Salt (coarse or Epsom salt works best)
- Paper towels or microfiber cloths
- Cotton swabs
- A small container or bowl
- Water (preferably distilled)
- A brush (optional)
- Silicone Accessories
Step 1: Disassemble the Peak Pro
Before you begin cleaning, ensure that your Peak Pro is powered off and fully cooled down. Remove the glass attachment from the base of the device. Carefully detach the atomizer if it is separate, but be gentle to avoid any damage.
Step 2: Rinse with Warm Water
Start by rinsing the glass attachment with warm water to remove any loose residue. This helps to loosen up any initial gunk before you get into the deeper cleaning.
Step 3: Prepare Cleaning Solution
In a small container, combine enough isopropyl alcohol to submerge your glass attachment. Add a tablespoon of salt to the alcohol. The salt acts as an abrasive, helping to scrub off stubborn resin and buildup. Make sure the solution is well-mixed.
Step 4: Soak the Glass
Place the glass attachment in the alcohol and salt solution. Let it soak for about 15-20 minutes. If your glass is especially dirty, you can soak it a little longer, but avoid soaking for hours as it could damage delicate components.
Step 5: Scrub the Glass
After soaking, take a cotton swab or brush and gently scrub the glass. Focus on the areas where residue is most likely to build up, like around the mouthpiece or the inner walls of the attachment. For stubborn spots, you can dip the swab in the alcohol solution before scrubbing.
Step 6: Rinse Thoroughly
Once you’ve cleaned all areas, rinse the glass thoroughly with warm water to remove any alcohol and salt residue. Be sure to rinse until the glass feels completely clean.
Step 7: Dry the Glass
Use a paper towel or microfiber cloth to gently dry the glass. Be careful not to apply too much pressure or risk cracking it. Let the glass air dry completely before reassembling it with the Peak Pro base and atomizer.
Step 8: Clean the Base and Atomizer (Optional)
If you want to keep your Peak Pro fully pristine, consider wiping down the base and atomizer as well. Use a damp cloth with a small amount of alcohol to clean the external parts. Be careful not to get any alcohol near the heating element or electrical parts.
Final Tip: Regular Maintenance
To avoid buildup from the start, try to clean your Peak Pro glass after every few uses. Regular cleaning will prevent residue from hardening, making it much easier to maintain the device. Additionally, using higher-quality concentrates can help reduce the amount of gunk left behind.
By following these steps, you’ll ensure that your Peak Pro continues to perform at its best, providing clean, flavorful sessions every time. Happy vaping!